Vesa Connector; Db15 Connector Pinout; Video Controller Summary - HP Vectra VL5 4 Technical Reference Manual

VESA CONNECTOR

The Video Electronics Standards Association (VESA) defines a standard video connector,
variously known as the VESA feature connector, auxiliary connector, or pass-through
connector. The integrated video controller supports an output-only VESA feature connector.
This connector is integrated directly on the system board, and is connected directly to the pixel
data bus and the synchronization signals.
To use the VESA feature connector in DOS, Windows 3.11 or Windows 95, the FCON.EXE
utility must be executed. This utility configures the system.
WARNING:

DB15 CONNECTOR PINOUT

VIDEO CONTROLLER SUMMARY

Video Controllers
Hardware Acceleration of major
graphics operations to speed up
applications using graphical user
interfaces (GUIs)
DRAM support
Graphics Resolutions Up to
Pixel Clock (Max.)
Use of the VESA feature connector will disable
the 1 MB video memory upgrade, if one is
installed. Only the standard 1 MB of video
memory will be used.
HP Vectra VL 5/xx Series 4 and HP Vectra VL 5/xx MT series 4
Integrated 64-bit Ultra VGA on
PCI bus
(S3 Trio 765 64V+or S3 Trio 764)
yes
1-2 MB of 60 ns
1 MB preinstalled, with 2 sockets
for upgrade to 1 MB (pair of
512KB modules)
1280 x 1024
135 MHz
64-bit Ultra VGA PCI video
adapter board
(Matrox MGA Millennium)
yes
2-8 MB of 60 ns2 MB
preinstalled, upgradeable to 4 MB
or 8 MB
1600 x 1200
135 MHz