Table of Contents
Advertisement
DPN-124G
CONNECTING TO PC
Invisible laser radiation may be emitted from the end of the fiber and/or
!
from DPN-124G . Take all necessary precautions to avoid unnecessary
exposure to this radiation.
PC with Ethernet Adapter
1. Connect an Ethernet cable between any of LAN ports located on the back
panel of the gateway and the Ethernet port of your PC.
2. To connect via USB modem: connect your USB modem to the USB port
located on the back panel of the gateway.
!
In some cases you will need to reboot the gateway after connection of
the USB modem.
3. To connect the device to a fiber optic line: connect the fiber optic cable
to the PON port on the back panel of the gateway. Make sure that center
conductor of the cable is inserted directly into the center of the PON
connector. Secure the cable by carefully pushing the fiber connector onto
the PON connector until tight. Be careful not to over-tighten the
connector or you may damage either the cable or the device.
4. To connect the device to an Ethernet line: in the web-based interface of
the gateway, select the gateway's LAN port that will be used as the WAN
port and create an Ethernet WAN connection. Then connect an Ethernet
cable between an available Ethernet port of the gateway and the Ethernet
line.
!
Please connect the gateway to the ISP's Ethernet line only after setting
the WAN port and creating the Internet connection.
5. Connect a phone cable between an FXS port of the gateway and the
phone.
6. Connect the power cord to the power connector port on the back panel of
the gateway, then plug the power adapter into an electrical outlet or power
strip.
2 It is recommended to use a USB extension cable to connect a USB modem to the
gateway.
Quick Installation Guide
2
5
Advertisement
Table of Contents
