Table of Contents
Advertisement
DPN-124G
3G WAN Connection
If the PIN code check is enabled for the SIM card inserted into your USB
modem, then prior to creating a 3G WAN connection, go to the USB
Modem / PIN page and enter the PIN code.
If the PIN code check for the SIM card inserted into your USB modem is
disabled, an active 3G WAN connection will be automatically created on the
Connections Setup / WAN page when connecting a USB modem to the
gateway. If the connection has not been created automatically, create a new
connection manually.
1. Go to the Connections Setup / WAN page.
2. Click the ADD button.
3. On the opened page, on the All Settings tab, select the 3G value from
the Connection type drop-down list.
4. Specify a name for your connection (any name for easier identification) in
the Connection name field.
5. If your operator requires to specify the access point name, in the USB
Modem section, fill in the APN field. In the Dial number field, enter
the number dialed to connect to the authorization server of the operator.
* For correct operation of USB modems you may need to update the gateway's
firmware.
*
Quick Installation Guide
22
Advertisement
Table of Contents
