HP Vectra VEi7 User Manual page 8

1 Setting Up and Using Your PC
Connecting to a Network (Selected Models Only)
Connecting to a Network (Selected Models Only)
Let your Network Administrator know you are connecting your PC to
the network.
Connect the network cable to the RJ-45 UTP (Unshielded Twisted
Pair) LAN connector.
10/100BT
Connector
HP provides drivers and installation information on non-HP network
adapter boards. Refer to the section on HP's Support
LAN Card Ready
web site at .
www.hp.com/go/vectrasupport
4 English