HP Vectra VEi7 User Manual page 28

Replacing the Cover
3 Replacing Hardware Components
Removing and Replacing the Cover and Front Panel
Before replacing the cover, ensure that all internal cables are properly
connected and safely routed.
1 If necessary, replace the front panel. To do this, insert the three
plastic tabs into the holes in the front of the PC chassis and snap the
panel in place.
2 Lower the cover and slide it into position.
3 Tighten the three thumbscrews at the rear of the PC.
4 If required, lock the cover with the key at the rear of the PC.
24 English