Replacing The Cover After Installing Accessories - HP Vectra VEC 7 User Manual

Replacing the Cover After Installing Accessories

1 Make sure that you have installed all your accessories and that all
internal cables are properly connected and safely routed.
2 Standing at the back of the PC, lower the cover onto the PC chassis
(aligning the rails on the inside edges of the cover with the sides of
the PC chassis), and firmly slide the cover forwards into position.
3 Tighten the three thumb screws at the back of the PC.
4 Reconnect all cables and power cords.
Step 2
2 How to Install Accessories in Your PC
Removing and Replacing the Cover
Step 3
English 21