Honda CBR1000ST 2019 Owner's Manual page 209

#
ID number input
You can input your ID number by pushing
the ignition (On) switch and Turn the
ignition switch knob
counterclockwise. Input the ID number on
the ID tag in order from the left in turn by
pushing the ignition (On) switch.
The ID number is input according to the
number of times the ignition (On) switch is
pushed.
Push the ignition (On) switch the desired
number of times, then turn the ignition
switch knob / (Off/Lock)
counterclockwise to fix the current digit (the
steering lock indicator goes off briefly and
comes on again), and input the next digit,
and then repeat until all the digits are input.
/ (Off/Lock)
Activating the Electrical System in an Emergency
While inputting the ID number, if the button
is not pressed for about 60 seconds, the
inputted ID number is cancelled and the
system returns to the state before removing
the SMART ECU fuse (the steering lock
indicator goes off).
Continued
205