Settings For Auditing Accounts - Sharp AR-5015 Operation Manual

USER PROGRAMS

Settings for auditing accounts

Settings of user programs No. 10 to 15 varies with the program number. For
setting of all programs, first follow steps 1 to 3 in "Setting the user programs"
on page 36 to select a program. (1. Press the light (
seconds. 2. Enter a program number (10 to 15) using the numeric keys. 3.
Press the START (
program.
Program No. 10: Auditing mode
If the auditing mode is enabled, copying is limited to operators with an
assigned 3-digit account number. A maximum of 20, 3-digit account
numbers can be assigned. Use program No. 11 to register account numbers.
When program No. 10 is entered, the current setting (0: OFF, 1:ON) will
blink on the right side of the copy quantity display.
Program No. 11: Account number entry
Program No. 11 is used to register accounts. When program No. 11 is entered,
"– – –" will blink in the copy quantity display.
If the number of accounts has reached the upper limit (20), "11E" will
appear in the copy quantity display. Press the
return to step 2 on page 36.
38
Downloaded from: http://www.usersmanualguide.com/
) key.) Then follow the appropriate instructions for the
1.
2.
3.
1.
2.
3.
4.
) key for more than 5
Select the desired setting using the numeric keys.
0: OFF
1: ON
Press the START ( ) key.
The setting will be stored.
To continue with other user programs, press the
and enter another program number. To exit the user
program mode, press the light (
key. The copier will
Enter a 3-digit account number using the numeric keys.
Any 3-digit number except "000" can be registered as an account
number.
Press the START ( ) key.
If a number that is already registered or "000" is entered, the number
will blink in the copy quantity display.
Repeat steps 1 and 2 for other account numbers.
To continue with other user programs, press the
and enter another program number. To exit the user
program mode, press the light (
key
) key.
key
) key.