Husqvarna 543 XP Operator's Manual page 3

11. Choke control
12. Fuel tank
13. Air purge bulb
14. Starter rope handle
15. Starter housing
16. Chain oil tank
17. Muffler
18. Chain brake and front hand guard
19. Front handle
20. Switch for heated handles (543 XPG)
21. Right hand guard
22. Clutch cover
23. Chain tensioning screw
24. Chain catcher
25. Saw chain
26. Guide bar
27. Bar tip sprocket
28. Chain adjuster pin
29. Brake band
30. Operator's manual
31. Transportation guard
32. Combination wrench
33. Product and serial number plate
34. Oil pump adjustment screw
35. Bar nuts
Symbols on the product
Careless or incorrect use of this product
can result in serious or fatal injury to the
operator or others.
Read the operator's manual carefully
and make sure you understand the
instructions before you use this product.
Always wear approved protective
helmet, approved hearing protection and
protective goggles or a visor.
This product is in accordance with
applicable EC Directives.
This product conforms to the applicable
UK regulations.
Noise emissions to the environment
label as per EU and UK directives
and regulations, and New South Wales
legislation "Protection of the Environment
Operations (Noise Control) Regulation
2017". The guaranteed sound power level
956 - 007 - 10.05.2022
of the product is specified in
data on page 34 .
Both of the operator's hands must be used
to operate the chainsaw.
Never operate the chainsaw holding it with
one hand only.
Never let the guide bar tip come in contact
with any object.
Warning! Kickback may occur when the
nose or tip of the guide bar touches an
object, and cause a lightning fast reverse
reaction, kicking the guide bar up and
towards the operator. May cause serious
personal injury.
Chain brake, activated (right). Chain
brake, not activated (left).
Choke lever in "open position".
Choke lever in "closed position".
Air purge.
Refuelling.
Chain oil fill.
Adjustment of the oil
pump.
Technical
3