Front Panel Features - Cisco Explorer 8450HDC User Manual

Dvr with multi-stream cable card interface
Table of Contents

Advertisement

Front Panel Features

POWER
1
1 Power
Turns the DVR on and off
2 USB
Connects to external USB devices (Reserved for future use)
3 VOL +, VOL -
Increases and decreases the volume
4 CH+, CH -
Scrolls through the channels
5 Select
Accesses your on-screen selection
6 IR Sensor
Receives the infrared signal from the remote control
7 Guide
Accesses the on-screen guide (if defi ned), Quick Settings, or General Settings guide
8 Info
Displays a description of the selected program. This button is available from the on-screen
guide and while viewing a program
9 Exit
Exits menus, the on-screen guide, and program information
10 List
Displays the Recorded List
11 LED Display
Displays the selected channel number and time of day.
The LED also displays the following:
12 Video and
Not available on all models. Connects to video and left/right (L/R) audio outputs from a TV
Audio Input
or other device. (Not available on 8540HDC)
Note: This illustration may vary from the actual product.
CAUTION: The DVR is equipped with a hard disk drive to store programs that you record and to allow you to rewind
and pause live TV. Any time the DVR is powered on (power LED is illuminated) or a recording is in progress (the
record LED is illuminated) the hard disk is in use.
If you need to move the DVR, complete the following steps to allow the hard disk to shut down properly. First, make
sure that no recording is in progress (record LED is off). Then, turn off power by pressing the Power key. Finally,
unplug the unit and wait 10 seconds for the hard disk drive to spin down (stop). At this point the unit can be moved
safely.
You should handle this product with the same level of care you would use when handling other electronics containing
a hard disk drive, such as a laptop computers or other hard disk drive equipped devices.
2
CH+
VOL-
VOL+
SELECT
CH-
GUIDE
2
3
4
5
6
Message (
)
HDTV
Power (
)
Output Resolution (1080i, 720p, 480p, or 480i)
AUTO - Automatically outputs native scan rates that your TV can accept
INFO
EXIT
LIST
L AUDIO IN R
VIDEO IN
7 8 9 10
11
12
Explorer 8550HDC
T13662

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cisco explorer 8540hdcExplorer 8550hdc

Table of Contents