Setup; Installing The Hp Bladesystem Components; Verifying System Components - HP ProLiant xw25p User Manual

Setup

In This Section
Installing the HP BladeSystem
Verifying System Components.....................................................................................................21
Connecting to the Network...........................................................................................................22
Installing Server Blade
Installing a Server Blade...............................................................................................................22
Completing the Configuration

Installing the HP BladeSystem Components

Before performing any server blade-specific procedures, install the
HP BladeSystem components in your environment. Refer to the hardware
installation and configuration poster that ships with the server blade enclosure.
The most current documentation for server blades and other HP BladeSystem
p-Class components is available at the HP website
(http://www.hp.com/products/servers/proliant-bl/p-class/info).
Documentation is also available in the following locations:
Documentation CD that ships with the server blade enclosure
HP Business Support Center website (http://www.hp.com/support)
HP Technical Documentation website (http://docs.hp.com)

Verifying System Components

1. Verify that the proper server blade enclosure is installed for the server blade.
Refer to "Server Blade Enclosure Compatibility (on page 16)."
2. Verify that adequate power is available. Refer to the HP BladeSystem
p-Class power calculator on the HP website
(http://www.hp.com/go/bladesystem/powercalculator).
Components................................................................................21
Options....................................................................................................22
......................................................................................................23
21