HP Pavilion t348 User Manual page 145

8 Holding the new memory module by its edges only, remove it from the
antistatic packaging. (Avoid touching the memory chips or the gold contacts
on the module.) The memory module has one or two small notches on the
lower edge that fit into raised bumps in the memory socket.
9 Hold the memory module in alignment with the socket, aligning the notches
with the bumps.
DIMM
10 Push straight down on top of the memory module until it is fully seated in the
socket. The retaining clips on the ends of the socket automatically lock it into
position when the memory module is fully seated.
To reassemble the computer:
1 If you moved any cabling, restore the cable connections and routing.
2 Replace the fan duct and the side panel (see "closing the computer" on
page 150).
3 Reconnect the power cord and all other cables.
4 Reconnect the modem/telephone cable.
5 Turn on the computer and all peripherals.
DDR DIMM
upgrading and servicing the pc (2)
137