Checking the wireless LAN device installation
You can verify that the integrated WLAN device is installed on the computer correctly by
using the Windows operating system Device Manager:
1
Click the Start button.
2
Type Device Manager into the Start Search box, and then click Device Manager to
open the Device Manager window.
3
Click Network adapters. Your WLAN device should be listed here. The WLAN
device may include the term wireless, wireless LAN, or 802.11.
NOTE: If no WLAN device is listed, either the computer does not have an integrated
WLAN device, or the driver for the device is not properly installed.
4
Click the Start button.
5
Type Network and Sharing Center into the Start Search box, and then click Network
and Sharing Center to open the Network and Sharing Center window.
6
Click Connect to a network, and then follow the onscreen instructions.
Using wireless security features
When you set up a home WLAN or access an existing public WLAN, always enable security
features to protect the network from unauthorized access. The most common security levels
are Wi-Fi Protected Access Personal (WPA-Personal) and Wired Equivalent Privacy (WEP).
When setting up a network, use one or more of the following security measures:
Enable WPA-Personal or WEP security encryption on the router.
Change the default network name (SSID) and password.
Set up a firewall.
Set security on your Web browser.
10
Getting Started (features vary by model)