Installing The Option Module; Placement Of The Om; Power Connection; Figure 2-1 Installing Option Module - ADTRAN DSX-1 User Manual

Chapter 2. Installation

INSTALLING THE OPTION MODULE

Placement of the Option M odule
Pow er Connection
6
Power to the TSU 100/600 should be off when installing the
DSX-1 Module.
Figure 2-1 represents the action required for proper
placement of the option module.
1. Remove cover plate from the TSU 100/600 rear
panel.
2. Slide option module into the rear panel until it is
positioned firmly against the front of the TSU 100/600.
3. Fasten thumb-screws at both edges of option module.
TSU 100/600
Each DSX-1 module derives power from the base TSU
100/600 unit. Power to the TSU 100/600 is supplied by a
captive eight foot power cord.
DSX-1 Passthru Option Module
Cover Plate
Option Module
Figure 2-1
Installing Option Module
61200.055L1-1C