Panasonic SC-HC395EG Service Manual page 49

Step 9 : Release catches.
Step 10 : Remove Bridge P.C.B..
Step 11 : Place a Support Block to support Front Panel Block
as shown.
Step 12 : Connect 14P FFC at connector (CN941) on Bridge
P.C.B..
Step 13 : Place FL P.C.B. on the Insulating Material.
Step 14 : Connect 14P FFC at connector (CN900) on FL
P.C.B..
Step 15 : Connect 2P wire at connector (CN7001) on NFC
P.C.B..
Step 16 : Check FL P.C.B. according to the diagram shown.
49