Define The Attributes Of An Automated Workflow - Canon VarioPrint 6000 Series Operation Manual

Define the attributes of an automated workflow

Define the attributes of an automated workflow
NOTE
It is not mandatory to define all the settings. When you put a check mark in front of a setting,
that setting and its values become enabled.
[General] attributes
[Queue name]
[Description]
[Overrule job ticket]
[Note for operator]
[Number of sets]
[Sorting]
[Variable data job (pages
per record)]
[Media]attributes
[Media]
[Fit to media size]
[Layout] attributes
[Print sides]
[Orientation]
[Rotate 180 degrees]
78 Chapter 5 - Prepare the print system
Description
You can enter a distinguishing name for the automated workflow
(maximum 25 characters). This name is also used as a label on the
control panel. This helps the operator to identify certain jobs on
the control panel. In this way, the operator can identify from which
LPR queue or workflow the job has arrived. Different LPR queues
can have the same label if the operator chooses to do so. In that
case, the operator cannot distinguish from which specific queue a
job has arrived. The LPR queue name is not displayed on the con-
trol panel.
You can enter a description of maximum 200 characters.
When this settings is enabled, then the settings of the automated
workflow will be used.
When this setting is disabled, then the settings of the job ticket
will be used.
You can create a note, for example a print or finishing instruction,
for the operator.
You can indicate how many sets of a job must be printed.
You can indicate whether the jobs must be sorted [By Set] or [By
Page].
Use this function to indicate that the job is a variable data job. En-
ter the number of pages that composes a record.
Description
You can enter the media that must be used.
You can indicate whether every page must be scaled to the media
size.
Description
You can indicate whether the jobs must be printed one-sided or
two-sided.
You can indicate whether the prints must be [Portrait] or [Land-
scape].
You can indicate that the prints must be rotated 180 degrees.
4
VarioPrint 6000 line