Introduction To The Counters - Canon VarioPrint 6000 Series Operation Manual

Introduction to the counters

Introduction
The [Maintenance] section of the [System] view displays 3 types of counters. 2 of these counters
provide information about the number of sheets that have been printed. The other counter
provides information about the amount of toner that has been used.
General counter information
The following table describes the counters in the [Maintenance] section of the [System] view.
Type of counter
[Billing counters]
[Day counters]
[Toner counters]
The [Billing counters] and the [Day counters] provide information about the number of 1-sided
and 2-sided prints that have been made on standard-size and large media. The length of the
media determines whether a media is standard size or large. Media with a length of less than 390
mm (15.35") are referred to and counted as standard-size media. Media with a length of 390 mm
(15.35") or more are referred to and counted as large media.
The control panel displays the media icon ( or
large media, the media icon is big. The media icon is used in various places on the control panel,
for example in the [Counters] section, in the [Trays] view and in the job information.
VarioPrint 6000 line
Description
The [Billing counters] section displays the total number of prints that
have been made since the machine was installed. You cannot reset the
billing counters.
The [Day counters] section displays the number of prints that have
been made since the counter was last reset to 0. You can, for example,
reset the day counters at the beginning of a working day or before you
start a new job for a particular customer.
The [Toner counters] section displays the amount of toner that has
been used since the machine was installed. You cannot reset the toner
counter.
) as a small icon for standard-size media. For
Chapter 12 - Maintain the print system
Introduction to the counters
301