Connect The Inlet Filter - Honeywell IntelliDoX User Manual

INTELLIDOX DOCKING MODULE

Connect the Inlet filter

Each IntelliDoX Enabler Kit contains inlet filters. Unless otherwise specified, the purge inlet is
configured to use ambient air in a fresh air environment with a normal atmosphere of 20.9%
v/v O
each unused gas inlet before using the module.
Once connected, the inlet filters help to protect the module from dust ingress. For best results,
replace the inlet filters periodically, or whenever the inlet filter is damaged or dirty. You may
connect an extension tubing to the inlet filter to draw ambient air from an adjacent fresh air
environment.
If an inlet filter is damaged, dirty, or missing, replace it immediately. For replacement parts,
contact Honeywell or an authorized distributor.
Connecting the Inlet Filter
1.
2.
3.
HONEYWELL
that is free of hazardous gas. Verify that an inlet filter is attached to the purge inlet and
2
Failure to comply may result in damaged equipment.
Verify that each inlet filter is free of obstructions and defects.
Connect an inlet filter to the purge inlet.
If necessary, connect an extension tubing to each inlet filter to draw ambient air from an
adjacent fresh air environment.
USER MANUAL || PREPARE MODULES FOR USE
PAGE 28 OF 119