Technical Data - IKEA SKALAN Manual

ENGLISH
What to do if...
Problem
There is no spark when light‐
ning the gas.
The flame is extinguishes im‐
mediately after lightning.
The gas ring burns unevenly.
If there is an error, first try to find a solution
to the problem yourself. If you cannot find a
solution to the problem yourself, contact
your IKEA store call centre. You can find a full
list of IKEA appointed contacts at the end of
this manual.

Technical data

Hob dimensions
Width
Depth
Built in height
Other technical data
Class Appliance: 3
Appliance Category: II2EK3B/P; II2L3B/P
Gas original:
Possible cause
There is no electrical supply.
There is no electrical supply.
Burner cap and crown are
placed incorrectly.
Thermocouple is not heated
enough.
Burner crown is blocked with
food remains.
Appliance gas supply: Natural gas G25.3
(2EK) 25 mbar; G25 (2L) 25 mbar
594 mm
This model is designed for use with natural
gas G25.3 25 mbar / G25 25 mbar but can be
510 mm
converted for use with natural gas G20 20
mbar, butane or propane gas G30/G31 30/30
40 mm
mbar providing the correct injectors. The
injectors not supplied with the appliance
have to be ordered from After Sales Service
(refer to the Service chapter).
TOTAL POWER
G25.3 (2EK) 25 mbar = 8.9 kW
G25 (2L) 25 mbar = 8.9 kW
Check if the unit is plugged in
and the electrical supply is
switched on.
Check the house electric in‐
stallation fuse.
Check if the burner cap and
crown are placed correctly.
After lightning the flame,
keep the knob pushed for
about 5 seconds.
Check if the main injector
and the burner crown are not
blocked with food remains.
If the appliance is misused
wrongly or installed not by
authorised technician, the service
is not free of charge, even during
the warranty period.
36
Remedy