3) Pin solder with soldering iron and absorber.
NA
4) Lift the connector up and away from the PCB.
NO
Connector repair
This procedure includes HDMI, Display Port, Mini Display Port, USB-C, USB-A and RJ45 connectors.
The connectors are on the main board (board part number 7ZB.06D01.0008).
The connector identifiers are as follows:
Connector
HDMI
DP
USB-C
RJ45
USB-A
USB-A
Before repairing connectors, follow these steps:
Prepare the monitor for disassembly. See Preparation for disassembly on page 13.
▲
HDMI connector HDMI1
Repair the HDMI connector:
1) Use a soldering iron and a de-soldering pump to remove as much solder as possible from the pin.
18
Location
HDMI1
DP1,DP2
USBC
RJ45
USB2,USB3
USB4,USB5