Rear And Side Components - HP Z27k G3 Maintenance And Service Manual

Rear and side components

To identify the components on the rear of the monitor, use this illustration and table.
Table 2-1 Rear and side components and their descriptions
Component
(1)
OSD control
(2) Security cable slot
(3) Master power switch
(4)
Power connector
(5) HDMI port
(6) DisplayPort connector
(7) DisplayPort connector
OUT
(8)
USB Type-C port with DP
Alt Mode 1.4, USB
upstream data, and
maximum power
delivery up to 100 W
(9)
RJ-45 (network) jack
(10) USB port
(11)
USB port
Battery charging 1.2
6
Description
Activates the OSD buttons so that the button labels appear on the
right side of the screen.
Connects an optional security cable.
Turns on or off all power to the monitor.
Connects the power cord.
Connects the HDMI cable to a source device such as a computer.
Connects the DisplayPort cable to a source device such as a
computer.
Connects the DisplayPort cable from the monitor to a
secondary monitor.
Connects the USB Type-C cable to a source device such as a
computer
Charges most USB Type-C devices even when the monitor is in
sleep mode
Note: The monitor must be set to Performance Mode.
This port also enables the USB Type-A ports to perform their
functions.
Connects an RJ-45 Ethernet network cable to the monitor.
Connects a USB cable to a peripheral device, such as a keyboard,
mouse, or USB hard drive.
Connects a USB cable to a peripheral device, such as a keyboard,
mouse, or USB hard drive and supports battery charging 1.2.