Assembly Instructions - Murray MT100 Operator's Manual

3.

Assembly Instructions

NOTICE: This lawn tractor is shipped without gas or oil in
the engine.
WARNING: If any parts are damaged or missing,
do not operate this product until the parts are replaced.
Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING: Do not attempt to modify this product or
create accessories not recommended for use with this
product. Any such alteration or modification is misuse and
could result in a hazardous condition leading to possible
serious personal injury.
WARNING: To prevent accidental starting that could
cause serious personal injury, always disconnect the engine
spark plug boot from the spark plug when assembling
parts.
WARNING: Never operate the tractor without the
proper safety devices, guards, and chute in place and
working. Never operate the tractor with damaged safety
devices. Operating the tractor with missing or damaged
parts can result in serious personal injury.
8
Some parts of your new lawn tractor have not been
completely installed for shipping purposes. To ensure safe
and proper operation, all parts and hardware must be
assembled as instructed below using appropriate tools to
ensure proper tightness.
Carefully remove the product and any accessories from the
package. Make sure that all items listed in the Packing List
are included.
Inspect the product carefully to make sure no damage
occurred during shipping.
If any parts are damaged or missing, please call
855-693-2582 for assistance.
Packing list Qty
Tractor 1
Seat Assembly 1
Steering Wheel Assembly 1
Dashboard Cover 1
Oil Drain Sleeve 1
Deck Anti-scalp Wheel Assembly 1
Air Duct Ring 1
Tractor operator's manual 1
Engine operator's manual 1
Wrench 2
Bottle of Engine Oil (1.4L) 1
MT100 LAWN TRACTOR
Assemble the Dashboard
Cover
1. Open the engine shroud and install the dashboard cover
into place. (Fig. 2)
Fig. 2
MT100 LAWN TRACTOR
Assemble the Air Duct Ring
1. Open the engine shroud and install the air duct ring into
the inside of the engine shroud. (Fig. 3)
Fig. 3
9