What Next - HP Ultrium Configuration Manual

and for compressed mode (default):
mksf -H -a -b U_18C
The hardware path can be found from previous ioscan output.
For Generation 2 half-height drives only: System Administration Manager (SAM) reports the
NOTE:
drive as Ultrium 460 instead of Ultrium 448:
This will be fixed in a later patch.

What next?

Once device files have been created, you should confirm that your new tape drive is working
properly. Chapter 7 on page 33 provides instructions on backing up and restoring a sample file to
test your installation.
HP Ultrium drives UNIX configuration guide 13