2.1 Speaker System - HP Media Center,Pavilion Media Center m200 Hardware Manual

2.1 Speaker System

1
Put the rubber feet on the bottom of the speakers.
2
Place the two speakers on the left and right of your
monitor or TV.
3
Place the subwoofer on the floor beneath your
computer desk or TV. Do not block the side or front of
the subwoofer, and allow for ventilation to reach the
rear of the subwoofer. Do not place the subwoofer by
the computer monitor; to avoid interference, place the
subwoofer 10 inches or more away from the monitor.
Connect speakers to computer
18
Connect
speakers to
subwoofer
*
LINE OUT
*
Connector
may be black
4
Refer to the setup poster for connecting the
2.1 speaker system.
5
You can test the speaker system. Click Start, All
Programs, Creative, Sound Blaster Audigy,
and then click AudioHQ. Double-click Speaker.
The Surround Mixer window opens. In the Speaker
box , be sure 2 Speaker shows, or select it from the
drop-down menu. Click Test to test the speakers.
Place subwoofer on floor
PREAMP INPUT