Switching Display Devices - HP Media Center,Pavilion Media Center 884 Supplementary Manual

This informs you when you've selected too
many shows (or the required space is too
large) to go onto the DVD. In this case, use the
MyDVD program to "tip and tale" trim the file,
creating two smaller files to store onto two
independent DVDs.
You cannot change the recording quality of
a program after it is recorded.
To change the Recording Quality setting:
1 In the Media Center Start menu, select
Settings.
2 Select TV/DVD.
3 Select Recorder.
4 Select Defaults.
18
Updated HP Media Center PC Information
5 Use the arrow buttons to select the Quality
option, and then press OK on the remote
control to change the setting until Good is
selected. Select OK in the window and then
press OK on the remote control again to enter
the change.
6 Press the Back button on the remote control
to return to the main Settings menu.

Switching Display Devices

When you connect more than one display device
(CRT monitor, flat panel monitor, TV, etc.) to the
PC, you can quickly change where the PC desktop
appears by pressing Alt+F5. Each time you press
the Alt+F5 key combination, the PC display
appears on the next device.
If Alt+F5 does not work, restart the PC and
try again.