HP Kayak XW U3-W3 User Manual page 13

riotx.bk : riotx-us.fb4 Page 9 Tuesday, December 16, 1997 3:08 PM
4 Carefully line up the connectors on the texture module and the
VISUALIZE fx4 board. Then using both thumbs, apply pressure to
the top of the texture module connector and press the texture board
into place. Ensure that the texture module is all the way in.
Insert the screw taken from
the blank stiffener board here.
(The texture module is
provided with the three other
screws.)
5 Secure the texture module in place by replacing the four screws,
using the small screw from the blank stiffener board.
1 HP VISUALIZE fx4 Texture Module User's Guide
Installing the Texture Module
VISUALIZE fx4
Connector
Texture Module
Texture Module
Connector
English English 9