HP Kayak XU03 User Manual page 40

Answers and Explanations
A client using an HP Kayak XW Series W3 PC Workstation is
11
calling about unusual graphics behavior on the screen. Which of
the following suggestions could be helpful?
a Run the Visualize FX4 diagnostics utility that is preinstalled on
the hard disk.
c From the Visualize FX4 video driver applet, select the Advanced
option then Conservative Hardware Access.
d Download the latest OpenGL graphic driver from the HP WWW
site.
How do I find out which version of the FastRAID board is being
12
used (FastRAID1 or FastRAID2)?
a The part number is marked on the FastRAID board. The part
number is also available in the Service Handbook.
FastRAID1 = 5064-1874
FastRAID2 = 5064-3668
c The FastRAID BIOS banner is displayed during Power-On Self-
Test (POST). Depending on the FastRAID board, the Adaptec
banner is different.
FastRAID2 = "RAIDport II". Otherwise, no RAIDport is displayed.
A FastRAID1 board can be used in HP Kayak XU and XW PC Worksta-
tions with a processor up to 333MHz. While, a FastRAID2 board can
only be used in HP Kayak XU and XW PC Workstations from 350 MHz.
The software used for FastRAID1 and FastRAID2 is only available in
English. However, it should be noted that the software between the
two generations of FastRAID are not compatible (ArrayConfig, Driv-
ers and
CI/O manager).
1. Part number is from the Kayak Service Handbook.
40
1
(ARO1130A)
1
(ARO1130B)