Checking the Display Screen
You can also use the
Boot Steps
the POST steps during the system startup. If the system stops during the
startup, the last successful boot step POST code is displayed on the LCD
status panel. For support purposes, POST steps are only shown as POST
codes. To access
Boot Steps
Press one of the LCD buttons,
1
Use the
button to scroll through the menus until you reach the
2
option. Then press the
Boot steps
For further details on the HP MaxiLife diagnostics utility, refer to the User's
Guide. This provides examples of error screens arising from pre-boot checks
and explains how to configure the HP LCD control buttons.
You can also obtain details of POST codes and POST error codes from the
HP World Wide Web site: http//www.hp.com/go/kayaksupport,
select the required platform, documentations, then choose the document
dealing with MaxiLife or LCD errors.
18
option from the LCD status panel. It shows
, proceed as follows:
or
, to display the main screen.
button.