HP Kayak XA-s02 Install Manual page 9

HP Kayak XA-s 02xx PC Workstation - Installing Accessories In Your HP Minitower PC Workstation
Video Adapter
Accessories Available
from Other Sources
8 Slide the memory module into the slot at 90° to the system board
(with the cutouts furthest away from the processor).
Slide the memory module into the slot at 90
to the system board
Push the module until the retaining clips click
into position
9 Firmly press the memory module completely into the connector
until the retaining clips click into position.
10 Repeat this procedure for each additional memory module you want
to install.
11 Install any other accessories if necessary, then replace all units and
reconnect all cables and power cords. Replace the cover (refer
to page 3).
12 Check the HP Summary Screen to verify the new configuration.
Additional accessories, including a video MPEG module, are available
for your video adapter. However, these accessories cannot be ordered
from HP. Contact your dealer for more details about these accessories.
Installing Memory
o
Memory module
cutouts
English
9