HP Kayak XA-s02 Install Manual page 19

HP Kayak XA-s 02xx PC Workstation - Installing Accessories In Your HP Minitower PC Workstation
4 If installing a drive in a 5.25-inch wide shelf, remove the drive tray
and put it in a safe place.
Secure the drive
in position
5 Slide the drive into the shelf.
6 Secure the drive in position using the screws provided with the
drive.
7 Locate the appropriate data cable for the device.
8 Connect the data and power cables to the rear of the device. (The
connectors are shaped to go in one way only.)
Data Cable
Mounting Rails
Installing Mass Storage Devices
Remove the
drive tray if
installing a
5.25-inch
drive
Slide the drive
into position
Power Cable
English
19