Table of Contents
Advertisement
CS-4010
Use an approved fuel container. Mark fuel containers as
◆
containing 2-stroke mixture fuel.
DO NOT smoke near fuel.
◆
DO NOT allow flames or sparks near fuel.
◆
Fuel tanks/cans may be under pressure. Always loosen
◆
fuel caps slowly allowing pressure to equalize.
NEVER refuel a unit when the engine is HOT or RUNNING!
◆
DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks
◆
outdoors over bare ground.
DO NOT overfill fuel tank. Wipe up spills immediately.
◆
Securely tighten fuel tank cap and close fuel container
◆
after refueling.
Inspect for fuel leakage. If fuel leakage is found, do not
◆
start or operate unit until leakage is repaired.
Move at least 3 m (10 ft.) from refueling location before
◆
starting the engine.
Gasoline vapor is heavier than air, and can travel along the
ground to nearby sources of ignition such as electrical motors,
pilot lights, and hot or running engines. Vapors ignited by an
ignition source can flash back to the fuel container, resulting in
an explosion, fire, serious or fatal injuries, and extensive
property damage.
Mixing Instructions
Stored fuel ages. Do not mix more fuel than you expect to use in 30
days, 90 days when a fuel stabilizer is added.
1.
Fill an approved fuel container
with half of the required
amount of gasoline.
2.
Add the proper amount of
2-stroke oil to gasoline.
3.
Close container and shake to
mix oil with gasoline.
4.
Add remaining gasoline, close
fuel container, and remix.
X7503380000
7/22 ECHO Incorporated
Fuel to Oil Mix – 50:1 Ratio
US
Gas
Oil
gal.
fl.oz.
1
2.6
2
5.2
5
13
OPERATION
Metric
Gas
Oil
L
cc
5
100
10
200
25
500
29
Advertisement
Table of Contents
