Installation Of I/O Card Software; Installation Of Port Id Driver Software; Installation Of Autolog Driver Software - Siemens TS2000 Service Manual

TS2000 Service Manual

4.4.7 Installation of I/O Card Software

4.4.8 Installation of Port ID Driver Software

4.4.9 Installation of Autolog Driver Software

SPB7-520.840.01.01.02
4-8
1. Run the PreSetup program from the CD.
2. Select "Install ODBC", and then "Continue".
3. From the Menu, select "Microsoft Fox Pro Driver"
and click "OK".
4. When finished, click "Close"/ "OK"/ and then close
"ODBC" window.
Follow steps 1-6, from 4.4.6.
1.
Select "Install Computer Boards Driver", then click
2.
"NEXT" three times.
Select "NO" on Readme note, and click "NO" to restart.
3.
From the "Computer Board" Menu, double click on
4.
"INSTACAL", click "OK" and then close the windows.
If you are not installing other SW programs, restart the
5.
computer.
Repeat steps 1-6 from 4.4.6.
1.
Select "Install DIPort IO Driver", and then click "YES",
2.
"NEXT", "YES" and "NEXT" five times.
Click "FINISH" to restart (if you are not installing other
3.
SW programs), and close window.
Repeat steps 1-6 from 4.4.6.
1.
Select "Disable" Windows NT.
2.
Enter the password you used before, and then click
3.
"OK" twice.
Click "OK," and then restart the computer.
4.
RD7409290-0 Rev. F