Scsi Cables; Using A Scsi Cable; Using Scsiselect With Scsi Devices - Compaq Evo D300 Hardware Reference Manual

Hard Drive Installation Guidelines

SCSI Cables

Using a SCSI Cable

✎

Using SCSISelect with SCSI Devices

B–6
The front drive bays are available for installing or connecting mass
storage SCSI devices.
Select models ship with a multimode SCSI cable that supports
Low Voltage Differential (LVD) or single-ended devices. The cable
accommodates up to three SCSI devices in the front drive bay area
(UATA models do not have the SCSI cable).
Five-Device SCSI Cable with Terminator
The cable that shipped with your computer may look different than
the one illustrated (a five-device cable).
For additional information about installing optional SCSI devices,
refer to the documentation included with the device option kit or
contact your Compaq authorized dealer, reseller, or service provider.
The SCSI host adapter includes the SCSISelect utility to configure the
host adapter and to run SCSI disk utilities. To run the SCSISelect
utility:
I
In Post Messages Enabled mode: Press
Press <Ctrl><A> for SCSISelect Utility message displays
during POST.
I
In Post Messages Disabled mode: When the Compaq logo screen
displays, press any key to exit the logo screen. Immediately after
exiting the logo screen, press
utility.
when the
Ctrl+A
to access the SCSISelect
Ctrl+A
Hardware Reference Guide