Installing Additional Memory; Installing And Removing Rimms; Rimm Socket Locations - HP Deskpro 300 Hardware Reference Manual

Installing Additional Memory

Installing and Removing RIMMs

RIMM Socket Locations

The Compaq Deskpro Workstation 300 supports Error Checking and
Correcting (ECC) Direct Rambus inline memory modules (RIMMs).
Additional RIMMs are available to upgrade the memory. A maximum
of 32 count Direct RDRAM devices is supported on each Direct
Rambus memory channel. Continuity RIMMs (CRIMMs) must
populate any empty sockets.
Your workstation supports a total of four RIMM sockets on two Direct
RDRAM channels. A maximum of 32 Direct RDRAM devices is
supported per channel.
The four RIMM sockets are numbered XMM1 and XMM2
(Channel A) and XMM3 and XMM4 (Channel B).
Location of RIMM sockets
1
RIMM Socket XMM3, Channel B
2
RIMM Socket XMM4, Channel B
3
RIMM Socket XMM1, Channel A
4
RIMM Socket XMM2, Channel A
Compaq Deskpro Workstation 300 Hardware Reference Guide 2-5