Oster OS-BDW12SD Instruction Manual page 59

(maximum)
from the bottom of the dish. The water drain hose should be fixed by a hose clip.
Start of Dishwasher
The followings should be checked before starting the dishwasher:
1 Whether the dishwasher is level and fixed
2 Whether the inlet valve is opened
3 Whether there is leakage at the connections of the conducts
4 Whether the wires are tightly connected
5 Whether the power is switched on
6 Whether the inlet and drain hoses are knotted
7 All packing materials and printings should be taken out from the dishwasher
Attention
After installation, please put this manual into the bags of printings.
The content of this manual is very helpful to the users.
T ROUB LE S H O OT I NG T I P S
Error codes
When some malfunctions happen, the appliance will display error codes to warn you.
Codes
E1 flash
E2 and flash
E3 flash
E4 flash
E5 flash
E6 flash
E7 flash
WARNING!
If overflow occurs, turn off the main water supply before calling a service. If there is water in
the base pan because of an overfill or small leak, the water should be removed before
restarting the dishwasher.
Meanings
Door open
Water inlet
Water drainage
Temperature sensor
Overflow/leakage
Water leakage
Heating element
English-26
Possible Causes
The door is opened when the
dishwasher is operating
Water inlet malfunction
Water drainage malfunction
Temperature sensor malfunction
Overflow occurs/Water leakage occurs
Water leakage occurs
Abnormal heating