Oster OS-BDW12SD Instruction Manual page 41

1
A. Remove the lower basket and then unscrew and remove the cap from the salt contai-
ner.
B. If you are filling the container for the first time, fill 2/3 of its volume with water (around
500ml).
C. Place the end of the funnel (supplied) into the hole and introduce about 2kg of salt. It is
normal for a small amount of water to come out of the salt container.
D. Carefully screw the cap back on.
E. Usually, the salt warning light will be off in 2-6 days after the salt container is filled with
salt.
NOTE:
1. The salt container must be refilled when the salt warning light in the control panel
comes on. Though the salt container is filled enough, the indicator light may not black
out before the salt fully dissolve. If there is no salt warning light in the control panel
(for some models), you can judge when to load the salt into the softener by the cycles
that the dishwasher had run (see the following schema).
2. If there are spills of the salt, a soak program could be run to wipe them out.
C. Fill the Rinse Aid Dispenser
Function of Rinse Aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, spot and
streak free drying.
Attention!
Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any other
substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the
appliance.
When to Refill the Rinse Aid Dispenser
If there is no rinse-aid warning light on the control panel, you can judge the amount of
rinse-aid by the color of the optical level indicator "D" located next to the cap. When the
rinse-aid container is full, the whole indicator will be dark .As the rinse aid diminishes,
the size of the dark dot decreases. You should never let the rinse aid get below 1 / 4
full.
2
English-8