Oster OS-BDW12SD Instruction Manual page 52

Table of Contents

Advertisement

Available languages

Available languages

Turning on the Appliance
Starting a wash cycle...
Draw out the lower and upper basket, load the dishes and
1. push them back. It is recommended to load the lower basket first, then the upper one (see
the section entitled "Loading the Dishwasher"). Pour in the detergent (see the section
entitled "Salt, Detergent and Rinse Aid").
2. Insert the plug into the socket. The power supply is 220-240V AC 50 Hz, the specification
of the socket is 12 A 250 VAC.50 Hz. Make sure that the water supply is turned on to full
pressure. Close the door, press the ON/OFF button, rotate the program selector to select a
desired "Wash cycle". (See the section entitled "Wash Cycle Table".) With a little force to
ensure the door is properly closed.
NOTE: A click could be heard when the door is closed perfectly. When the washing is over,
you can shut off the switch by pressing ON/OFF button.
Switching on
1. Open the tap, if it is closed.
2. Close the door.
3. Make sure the spray arms are not obstructed.
4. Switch the dishwasher on using the " " button.
Select a programme
Choose your programme according to the type of load and how dirty it is.
The different programmes and their uses are described in the programme chart later on in
this booklet. Use the programme selector to select the expected programme.
Change the Programme.
Premise: A cycle that is underway can only be modified if it has only been running for a short
time. Otherwise, the detergent may have already been released, and the appliance may
have already drained the wash water. If this is the case, the detergent dispenser must be
refilled (see the section entitled " Fill in the Detergent " ).
1:Press the "ON/OFF" button to cancel the programme.
2:Turn on it again and rotate the programme selector to the expected cycle setting (see the
section entitled "Starting a wash cycle. . . " ).
NOTE: If you open the door when the washing cycle underway, the appliance will pause
and emit warning signals, the digital display show "E1" and flash. When you close the door,
the machine will keep on working after 10 seconds.
Forget to Add Dish
A forgotten dish can be added any time before the detergent cup opens.
1 Open the door a little to stop the washing.
2 After the spray arms stop working, you can open the door completely.
3 Add forgotten dishes.
4 Close the door, the dishwasher will work after ten seconds.
English-19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Os-bdw12wd

Table of Contents