Printers - HP Compaq t5710 Quick Reference Manual

Peripherals
✎

Printers

Ä
✎
✎
6-2
5. The Ports (COM & LPT) listing will display if not already
shown. Under the Ports (COM & LPT) listing, a new COM port
will display for the new connection. Note which COM port
number is assigned to the new connection.
6. Continue the installation procedure for the connected device
using the discovered port number when prompted. Use the
manufacturer's procedures for other devices, such as a serial
touch screen.
You cannot use more than two USB to serial converters at one time.
A generic universal print driver is installed on the thin client to
support text-only printing to a locally connected printer. To print full
text and graphics to a locally connected printer, install the driver
provided by the manufacturer and follow the manufacturer's
instructions. Be sure to disable the write filter cache or run the
-commit
command to save the installation. You can print to network
printers from ICA and RDP applications through print drivers on the
servers.
For additional information, please review the Printing and Imaging
Support on HP Thin Clients white paper on the HP support site at:
http://welcome.hp.com/country/us/en/support.html
CAUTION: If the available free space on the flash memory is reduced to
less than 3 MB, the thin client becomes unstable.
Downloading and using printers requires sufficient flash space. In
some cases, you may have to remove software components to free up
space for printers.
Printing to a locally-connected printer from an ICA or RDP session
using the print drivers of the server produces full text and graphics
functionality from the printer. To do this, you must install the print
driver on the server and the text-only driver on the thin client (see the
following section).
www.hp.com
.
Quick Reference Guide