HP Compaq t5710 Quick Reference Manual page 59

Control Panel extended selections
After you remove the USB flash drive and cycle power to the system,
the image will unbundle. This process can take between 10-12
minutes. Do not interrupt or cycle power to the unit during this
process.
You may use the captured image (flash.ibr) found in the USB flash
drive in combination with Altiris Deployment Solution to remotely
image multiple thin client units.
✎
You must use flash.ibr in conjunction with HP's ThinState Deploy
utility (e.g. ibr.exe). Flash.ibr is not compatible with Altiris'
rdeploy.exe or rdeployt.exe utilities. Please consult the HP Compaq
Thin Client Imaging Tool at:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c0
0485307/c00485307.pdf
http://www.altiris.com/
For more information about Altiris, see .
www.hp.com
Quick Reference Guide 4-15