Page 1
Electronic Paper Display Settings Tool Version 1.0 OPERATION MANUAL Applicable models (as of December 2023) Available models differ according to region. EP-C131 / EP-C251...
Contents Introduction ....................................3 System Requirements ................................3 Operation workflow ..................................4 Starting this software ................................. 4 Set up this software ................................... 4 Changing display image or settings of the monitor ........................5 Menu item details ..................................6...
• Transcribing or duplicating part or all of this manual and/or this software without permission from our company is not permitted. • As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice.
Operation workflow Starting this software 1. Double-click “EPsetting.exe” in unzipped folder. T I P • Installation is not required. • Delete the downloaded exe file and the unzipped folder if this software is not required. Set up this software 1. Start this software. (See above.) 2.
Changing display image or settings of the monitor n Change by connecting a computer Connect the monitor to the computer running this software, and change the display image/settings. 1. Connect the power source to the monitor. 2. Connect the Computer/USB flash drive connection terminal of the monitor to the computer using a commercially available USB cable (Type-C, conforming to the USB standard).
Menu item details n Slideshow Image list Specify the images to show on the monitor and the display order. Add ......Add a display image to the image list. Up / Down ....Change the image order. Delete ......Delete image from image list. Preview The image selected in the image list will be displayed.
Page 7
n Panel App Settings Default App Usually “Slideshow” should be used. Select “e-Signage S Player A1” when distributing with e-Signage S (optional). Check the e-Signage S manual regarding e-Signage S. Network Settings Bluetooth Use Bluetooth..... Set whether or not to use Bluetooth. This setting will be set to off approx.
Page 8
n e-Signage S Player A1 Set e-Signage S Player A1 settings when the “Default App” is set to “e-Signage S Player A1”. Images can be distributed to the monitor with e-Signage S (optional). Check the e-Signage S manual regarding e-Signage S. Check the e-Signage S manual regarding “Player setting”, “Network Settings”, and “Player Device control settings”.