HP Compaq Presario,Presario 8380 Supplementary Manual page 49

Removing a DIMM
To remove a DIMM:
1
Turn off the computer and all peripherals.
2
Disconnect the modem cable.
3
Disconnect the power cord.
4
Remove the back panel (see "Removing the Back
Panel" on page 37).
5
Remove the right side panel (see "Removing the
Right Side Panel" on page 38).
6
Lay the computer gently on its left side.
7
Push down on the two retaining clips on the ends
of the DIMM socket until the DIMM pops out of
the socket.
Warning:
Do not pull the DIMM out of the socket.
Use the retaining clips to eject the DIMM.
8
Holding the DIMM by its edges only, lift it away
from the socket. Store it in its antistatic
packaging.
9
To install a new DIMM in this socket, see
"Installing a DIMM" on page 43.
Chapter 3 Upgrading and Servicing Your Computer
45