If An Error Is Displayed On The Operation Panel - Canon S830D Quick Start Manual

5

If an Error Is Displayed on the Operation Panel

If an error number is displayed on the operation panel, correct the error according to the
procedure below.
error number
Black
Photo-cyan
Photo-magenta
Cyan
Magenta
Yellow
Error number: 001
Cause: Printer is being used.
Corrective action:
Printing starts when printing from the computer is completed. Press the Cancel button to stop
printing.
Error number: 002
Cause: Printer is not ready.
Corrective action:
Wait until preparations are completed. Printing will start when preparations are completed.
Error number: 101
Cause: Ink level is low.
Corrective action:
Prepare a replacement ink tank. Press the Print button to restart printing even though the print level
is low. Printing will start when the ink tank is replaced (see page 56). Press the Cancel button to
stop printing.
Error number: 102
Cause: Position of paper thickness lever is not correct.
Corrective action:
Printing will start when you set the paper thickness lever to the correct position. Press the Print
button to start printing with paper thickness lever position that is currently set. Press the Cancel
button to stop printing.
Note
If the display or buttons on the operation panel
are not operating properly even through an error
is not displayed, turn off the printer, unplug the
power cord, and then turn on the power again.
Note
The colour of the ink tank affected by the error can
be checked in Media Type. An error has occurred
in the ink tank indicated by the blinking position.
53