Using The Optional Image Viewer - Canon S830D Quick Start Manual

Using the Optional Image Viewer

The optional TFT Image Viewer <<IV-100>> allows you to display JPEG image data stored on
the inserted memory card and check the print layout of the first page.
Switching the Viewer Display On/Off
Switching the Viewer Display On
After attaching the viewer to the printer, turn on the viewer display according to the following
procedure:
1
Turn on the printer.
2
Insert the memory card containing saved JPEG data into the card slot
(see page 28).
The first data that was saved to the memory card is displayed on the viewer.
Note
When Digital Print Order Format (DPOF) is set, the photographs are displayed in the
chronological order they were shot.
Switching the Viewer Display Off
The viewer display goes off under the following conditions:
• The printer is turned off.
• A digital camera that can print data directly is connected (see page 31).
• The inserted memory card is ejected.
Note
If no key operation on the operation panel is performed for about five minutes, the
viewer display goes off automatically (sleep mode). In sleep mode, the viewer display
comes back on when a key operation is performed on the operation panel.
32