Installing And Removing The Memory Module; Dimm Population Table - Gigabyte MP72-HB0 User Manual

1-4-2 Installing and Removing the Memory Module

Before installing a memory module, make sure to turn off the computer and unplug the
power cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR4 DIMMs on to this motherboard.
Follow these instructions to install a DIMM module:
1. Insert the DIMM memory module vertically into the DIMM slot and push it down.
2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
3. Reverse the installation steps when you want to remove the DIMM module.

1-4-3 DIMM Population Table

Type
RDIMM
RDIMM
Hardware Installation
2
Capacity (GB)
Ranks Per DIMM
and Data Width
DIMM Density
SRx4
DRx8
1
Speed (MT/s); Voltage (V);
Slots per Channel(SPC) and
DIMM
DIMM per Channel (DPC)
1 Slot per
Channel
1DPC
8Gb 1.2V
16GB
3200
16GB
- 16 -
2
2 Slots per
Channel
1DPC 2DPC
1.2V 1.2V
3200
3200