Canon imageCLASS MF4570dw Starter Manual page 23

1 2
Preface Installing the Machine
Select.
3
Configuring and Connecting the Fax
If no devices are displayed in [Device List]
Perform the following procedure.
1. Check the following.
• The computer and device are connected via the
(1)
network.
• The device is turned on.
• The IP address is set correctly.
• The computer and device are on the same subnet.
(2)
• Security software has been exited.
2. Click [Update Device List].
Click. If any devices are not displayed by performing the
above procedure, perform the following procedure.
1. Click [Search by IP Address].
2. Enter the IP address of the device to be
installed.
"Checking the IP Address" (P. A-3)
3. Click [OK].
Next, installation of MF Toolbox
starts.
* In Windows 2000 Server/ Server 2003/2008, MF
Toolbox is not installed. Proceed to Step
Click.
Ensure that [
Click.
Checking the Installation Results
4
Connecting to a Computer and
Installing the Drivers
.
] is added.
Click.
P. 24
Appendix
Click.
The installation starts.
Click.
Select the check box.
(1)
Click.
The CD-ROM may be removed
once this screen appears.
(2)
21