Canon PIXMA iP90 Quick Start Manual page 83

Problem Possible Cause
Printer not ready
"Error No.: 300"
Printer not properly
connected
Your printer name is
not displayed in the
Printer List of
Printer Setup Utility
(or Print Center)
Waste ink absorber
almost full
"Error No.:1700"
A specified period
of time has elapsed
"Error No.:2001"
without receiving a
response from the
digital camera/The
digital camera or
digital video
camcorder
connected is not
compatible with
this printer
If the ink tank has
been replaced with
Have you replaced
a new one
an ink tank with a
new one? message is
displayed
If the ink tank has
been removed for a
certain period (the
ink tank has not
been replaced)
If the POWER lamp is off, turn the printer on.
If the POWER lamp is flashing green, the printer is initializing. Wait until the
POWER lamp stops flashing.
Ensure that the printer is securely connected to the computer.
Note If you are using a switching hub or other device, disconnect the
printer and reconnect it directly to the computer and try printing
again.
If successful, the problem may have been with the device.
There could also be a problem with the cable(s). Replace the
cable(s) and try printing again.
1. Select Applications from the Go menu.
2. Double-click the Printer Setup Utility icon in the Utilities folder.
If you are using an OS other than Mac OS X v.10.3, double-click the Print
Center icon.
3. Ensure that iP90 is displayed in the Printer List.
If iP90 is not displayed in the Printer List, reinstall the printer driver.
Note If the problem persists, delete all unnecessary documents
from the Extensions and Control Panels folder.
The printer has a built-in waste ink absorber to hold the ink used during print
head cleaning. Eight flashes indicates that this absorber is nearly full.
Press the RESUME/CANCEL button to clear the error so you can continue
printing. Before the waste ink absorber becomes completely full, contact the
Customer Care Center.
Disconnect the camera cable, press the RESUME/CANCEL button on the printer
and reconnect the cable.
If the error is still unresolved, there is a possibility that you are using a digital
camera or digital video camcorder that is not supported by this printer. Use a
digital camera or digital video camcorder compatible with this printer.
Click Yes to reset the ink counter.
See "Resetting the Ink Counter"
Click No on the dialog box described above.
You can choose the option to disable the diaplay of this confirmation message.
1. Ensure that the printer is turned on and open the Printer Properties dialog
box.
2. Click the Maintenance tab and then click Low Ink Warning Setting.
3. Clear the check box of Display a confirmation message of ink tank
replacement and click Send.
Troubleshooting
Try This
on page 64.
79