Correcting Red-Eye - Canon PowerShot G1 X User Manual

Editing Still Images

Correcting Red-Eye

Automatically corrects images affected by red-eye. You can save the
corrected image as a separate file.
• Some images may not be corrected accurately.
• To overwrite the original image with the corrected image, choose
[Overwrite] in step 4. In this case, the original image will be erased.
• Protected images cannot be overwritten.
• RAW images cannot be edited this way.
• Red-eye correction can be applied to JPEG images shot in
the original image cannot be overwritten.
164
Choose [Red-Eye Correction].
Press the n button, and then choose
[Red-Eye Correction] on the 1 tab (p. 41).
Choose an image.
Press the qr buttons or turn the 7 dial to
choose an image.
Correct the image.
Press the m button.
Red-eye detected by the camera is now
corrected, and frames are displayed around
corrected image areas.
Enlarge or reduce images as needed. Follow
the steps in "Magnifying Images" (p. 145).
Save as a new image and review.
Press the opqr buttons or turn the 7 dial
to choose [New File], and then press the m
button.
The image is now saved as a new file.
Follow step 5 on p. 160.
, but