Flash
Shooting with the FE Lock
Just as with the AE lock (p. 93), you can lock the exposure for the flash shots.
•
FE: Flash Exposure
Changing the Flash Timing
Change the timing of the flash and shutter release as follows.
118
Raise the flash and set it to h
(p. 116).
Lock the flash exposure.
Aim the camera at the subject to shoot with
the exposure locked, and then press the
button.
The flash fires, and when
the flash output level is retained.
Compose the shot and shoot.
After one shot, FE is unlocked and
longer displayed.
Access the setting screen.
Press the n button, choose [Flash
Control] on the 4 tab, and then press the m
button (p. 41).
Configure the setting.
Choose [Shutter Sync.], and then choose the
desired option (p. 41).
1st-
The flash fires immediately after the shutter
curtain
opens.
2nd-
The flash fires immediately before the
curtain
shutter closes.
is displayed,
is no