Brother Upgrade KIT III Operation Manual page 25

h
Rotate the handwheel and check that the
needle is in the left half of the hole in
embroidery couching foot "Y".
If the needle is not in the left half, use the multi-
purpose screwdriver to turn the screw of embroidery
couching foot "Y" to adjust the position of the
embroidery foot. Turn the screw toward you to move
the embroidery foot to the right. Turn the screw toward
the back to move the embroidery foot to the left.
After making adjustments, rotate the handwheel and
check that the needle does not touch the presser foot.
i
Attach the spool stand to the machine.
At this time, do not raise the telescopic thread guide
shaft.
* Refer to "Assembling the Spool Stand" in the
machine's Operation Manual (Sewing).
j
Insert the yarn guide for embroidery
couching into the slot on the top left of the
machine.
Note
• There are two yarn guides: one for sewing
couching and one for embroidery couching.
Check the shape of the part, and then install
the appropriate guide.
a
a Yarn guide for embroidery couching
b Yarn guide for sewing couching
k
Pass the yarn through the telescopic thread
guide and the yarn guide (1) to (2).
1
2
Note
• Pull off an appropriate amount of yarn from
the ball so that the yarn does not become
taut.
• Make sure that the yarn does not become
entangled as you work.
l
Pass the yarn through the guide on
embroidery couching foot "Y".
EMBROIDERY
b
24