Canon imageCLASS MF7470 Basic Operation Manual page 319

Error Code
#0005 –
–
#0009
The paper has run out or the paper
drawer is not set properly.
#0012
You could not send because the other
party's fax machine is out of paper.
#0018 –
–
–
–
#0037
The memory is full.
11‑22
Description
The recipient did not respond
within 35 seconds.
The other party may not be using a
G3 fax machine.
The recipient's machine did not
respond when your machine
retried sending documents.
The documents could not be sent
because the recipient's machine
was busy.
The settings on your machine do
not match the settings on the
recipient's machine.
No pause was included in the
telephone number when sending a
fax overseas.
Action
– Send the document again. Contact
the other party and have them
check their fax machine. If you
are making an overseas call, add a
pause to the number.
– Check with the other party and
send the document to a G3 fax
machine. If the other party does
not have a G3 fax machine, try
sending your document using
a transmission mode the other
party's fax machine supports.
Load the paper or insert the paper
drawer properly.
Contact the other party and ask them
to load the paper.
– Confirm that the recipient's
machine is able to communicate,
and try again.
– Confirm that the recipient's
machine is able to communicate,
and try again.
– Confirm that the recipient's
machine is able to communicate,
and try again.
– Insert a pause after the country
code, or after the fax number of
the other party, and then dial the
number again.
– Change the Long Distance setting
on the Option screen if you are
sending documents to destinations
stored in the Address Book or
one‑touch buttons. (See "Storing/
Editing Address Book," on p. 4‑58,
or "Storing/Editing One‑Touch
Buttons," on p. 4‑71.)
Print, send, or delete any documents
stored in memory.